D-Bus
1.8.1
Main Page
Related Pages
Modules
Data Structures
Files
File List
src
fdo
dbus-1.8
dbus
sd-daemon.h
1
/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
2
3
#ifndef foosddaemonhfoo
4
#define foosddaemonhfoo
5
6
/***
7
Copyright 2010 Lennart Poettering
8
9
Permission is hereby granted, free of charge, to any person
10
obtaining a copy of this software and associated documentation files
11
(the "Software"), to deal in the Software without restriction,
12
including without limitation the rights to use, copy, modify, merge,
13
publish, distribute, sublicense, and/or sell copies of the Software,
14
and to permit persons to whom the Software is furnished to do so,
15
subject to the following conditions:
16
17
The above copyright notice and this permission notice shall be
18
included in all copies or substantial portions of the Software.
19
20
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
21
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
23
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
24
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
25
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
26
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
27
SOFTWARE.
28
***/
29
30
#include <sys/types.h>
31
#include <inttypes.h>
32
33
#ifdef __cplusplus
34
extern
"C"
{
35
#endif
36
37
/*
38
Reference implementation of a few systemd related interfaces for
39
writing daemons. These interfaces are trivial to implement. To
40
simplify porting we provide this reference implementation.
41
Applications are welcome to reimplement the algorithms described
42
here if they do not want to include these two source files.
43
44
The following functionality is provided:
45
46
- Support for logging with log levels on stderr
47
- File descriptor passing for socket-based activation
48
- Daemon startup and status notification
49
- Detection of systemd boots
50
51
You may compile this with -DDISABLE_SYSTEMD to disable systemd
52
support. This makes all those calls NOPs that are directly related to
53
systemd (i.e. only sd_is_xxx() will stay useful).
54
55
Since this is drop-in code we don't want any of our symbols to be
56
exported in any case. Hence we declare hidden visibility for all of
57
them.
58
59
You may find an up-to-date version of these source files online:
60
61
http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h
62
http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c
63
64
This should compile on non-Linux systems, too, but with the
65
exception of the sd_is_xxx() calls all functions will become NOPs.
66
67
See sd-daemon(3) for more information.
68
*/
69
70
#ifndef _sd_printf_attr_
71
#if __GNUC__ >= 4
72
#define _sd_printf_attr_(a,b) __attribute__ ((format (printf, a, b)))
73
#else
74
#define _sd_printf_attr_(a,b)
75
#endif
76
#endif
77
78
/*
79
Log levels for usage on stderr:
80
81
fprintf(stderr, SD_NOTICE "Hello World!\n");
82
83
This is similar to printk() usage in the kernel.
84
*/
85
#define SD_EMERG "<0>"
/* system is unusable */
86
#define SD_ALERT "<1>"
/* action must be taken immediately */
87
#define SD_CRIT "<2>"
/* critical conditions */
88
#define SD_ERR "<3>"
/* error conditions */
89
#define SD_WARNING "<4>"
/* warning conditions */
90
#define SD_NOTICE "<5>"
/* normal but significant condition */
91
#define SD_INFO "<6>"
/* informational */
92
#define SD_DEBUG "<7>"
/* debug-level messages */
93
94
/* The first passed file descriptor is fd 3 */
95
#define SD_LISTEN_FDS_START 3
96
97
/*
98
Returns how many file descriptors have been passed, or a negative
99
errno code on failure. Optionally, removes the $LISTEN_FDS and
100
$LISTEN_PID file descriptors from the environment (recommended, but
101
problematic in threaded environments). If r is the return value of
102
this function you'll find the file descriptors passed as fds
103
SD_LISTEN_FDS_START to SD_LISTEN_FDS_START+r-1. Returns a negative
104
errno style error code on failure. This function call ensures that
105
the FD_CLOEXEC flag is set for the passed file descriptors, to make
106
sure they are not passed on to child processes. If FD_CLOEXEC shall
107
not be set, the caller needs to unset it after this call for all file
108
descriptors that are used.
109
110
See sd_listen_fds(3) for more information.
111
*/
112
int
sd_listen_fds(
int
unset_environment);
113
114
/*
115
Helper call for identifying a passed file descriptor. Returns 1 if
116
the file descriptor is a FIFO in the file system stored under the
117
specified path, 0 otherwise. If path is NULL a path name check will
118
not be done and the call only verifies if the file descriptor
119
refers to a FIFO. Returns a negative errno style error code on
120
failure.
121
122
See sd_is_fifo(3) for more information.
123
*/
124
int
sd_is_fifo(
int
fd,
const
char
*path);
125
126
/*
127
Helper call for identifying a passed file descriptor. Returns 1 if
128
the file descriptor is a special character device on the file
129
system stored under the specified path, 0 otherwise.
130
If path is NULL a path name check will not be done and the call
131
only verifies if the file descriptor refers to a special character.
132
Returns a negative errno style error code on failure.
133
134
See sd_is_special(3) for more information.
135
*/
136
int
sd_is_special(
int
fd,
const
char
*path);
137
138
/*
139
Helper call for identifying a passed file descriptor. Returns 1 if
140
the file descriptor is a socket of the specified family (AF_INET,
141
...) and type (SOCK_DGRAM, SOCK_STREAM, ...), 0 otherwise. If
142
family is 0 a socket family check will not be done. If type is 0 a
143
socket type check will not be done and the call only verifies if
144
the file descriptor refers to a socket. If listening is > 0 it is
145
verified that the socket is in listening mode. (i.e. listen() has
146
been called) If listening is == 0 it is verified that the socket is
147
not in listening mode. If listening is < 0 no listening mode check
148
is done. Returns a negative errno style error code on failure.
149
150
See sd_is_socket(3) for more information.
151
*/
152
int
sd_is_socket(
int
fd,
int
family,
int
type,
int
listening);
153
154
/*
155
Helper call for identifying a passed file descriptor. Returns 1 if
156
the file descriptor is an Internet socket, of the specified family
157
(either AF_INET or AF_INET6) and the specified type (SOCK_DGRAM,
158
SOCK_STREAM, ...), 0 otherwise. If version is 0 a protocol version
159
check is not done. If type is 0 a socket type check will not be
160
done. If port is 0 a socket port check will not be done. The
161
listening flag is used the same way as in sd_is_socket(). Returns a
162
negative errno style error code on failure.
163
164
See sd_is_socket_inet(3) for more information.
165
*/
166
int
sd_is_socket_inet(
int
fd,
int
family,
int
type,
int
listening, uint16_t port);
167
168
/*
169
Helper call for identifying a passed file descriptor. Returns 1 if
170
the file descriptor is an AF_UNIX socket of the specified type
171
(SOCK_DGRAM, SOCK_STREAM, ...) and path, 0 otherwise. If type is 0
172
a socket type check will not be done. If path is NULL a socket path
173
check will not be done. For normal AF_UNIX sockets set length to
174
0. For abstract namespace sockets set length to the length of the
175
socket name (including the initial 0 byte), and pass the full
176
socket path in path (including the initial 0 byte). The listening
177
flag is used the same way as in sd_is_socket(). Returns a negative
178
errno style error code on failure.
179
180
See sd_is_socket_unix(3) for more information.
181
*/
182
int
sd_is_socket_unix(
int
fd,
int
type,
int
listening,
const
char
*path,
size_t
length);
183
184
/*
185
Helper call for identifying a passed file descriptor. Returns 1 if
186
the file descriptor is a POSIX Message Queue of the specified name,
187
0 otherwise. If path is NULL a message queue name check is not
188
done. Returns a negative errno style error code on failure.
189
*/
190
int
sd_is_mq(
int
fd,
const
char
*path);
191
192
/*
193
Informs systemd about changed daemon state. This takes a number of
194
newline separated environment-style variable assignments in a
195
string. The following variables are known:
196
197
READY=1 Tells systemd that daemon startup is finished (only
198
relevant for services of Type=notify). The passed
199
argument is a boolean "1" or "0". Since there is
200
little value in signaling non-readiness the only
201
value daemons should send is "READY=1".
202
203
STATUS=... Passes a single-line status string back to systemd
204
that describes the daemon state. This is free-from
205
and can be used for various purposes: general state
206
feedback, fsck-like programs could pass completion
207
percentages and failing programs could pass a human
208
readable error message. Example: "STATUS=Completed
209
66% of file system check..."
210
211
ERRNO=... If a daemon fails, the errno-style error code,
212
formatted as string. Example: "ERRNO=2" for ENOENT.
213
214
BUSERROR=... If a daemon fails, the D-Bus error-style error
215
code. Example: "BUSERROR=org.freedesktop.DBus.Error.TimedOut"
216
217
MAINPID=... The main pid of a daemon, in case systemd did not
218
fork off the process itself. Example: "MAINPID=4711"
219
220
WATCHDOG=1 Tells systemd to update the watchdog timestamp.
221
Services using this feature should do this in
222
regular intervals. A watchdog framework can use the
223
timestamps to detect failed services.
224
225
Daemons can choose to send additional variables. However, it is
226
recommended to prefix variable names not listed above with X_.
227
228
Returns a negative errno-style error code on failure. Returns > 0
229
if systemd could be notified, 0 if it couldn't possibly because
230
systemd is not running.
231
232
Example: When a daemon finished starting up, it could issue this
233
call to notify systemd about it:
234
235
sd_notify(0, "READY=1");
236
237
See sd_notifyf() for more complete examples.
238
239
See sd_notify(3) for more information.
240
*/
241
int
sd_notify(
int
unset_environment,
const
char
*state);
242
243
/*
244
Similar to sd_notify() but takes a format string.
245
246
Example 1: A daemon could send the following after initialization:
247
248
sd_notifyf(0, "READY=1\n"
249
"STATUS=Processing requests...\n"
250
"MAINPID=%lu",
251
(unsigned long) getpid());
252
253
Example 2: A daemon could send the following shortly before
254
exiting, on failure:
255
256
sd_notifyf(0, "STATUS=Failed to start up: %s\n"
257
"ERRNO=%i",
258
strerror(errno),
259
errno);
260
261
See sd_notifyf(3) for more information.
262
*/
263
int
sd_notifyf(
int
unset_environment,
const
char
*format, ...) _sd_printf_attr_(2,3);
264
265
/*
266
Returns > 0 if the system was booted with systemd. Returns < 0 on
267
error. Returns 0 if the system was not booted with systemd. Note
268
that all of the functions above handle non-systemd boots just
269
fine. You should NOT protect them with a call to this function. Also
270
note that this function checks whether the system, not the user
271
session is controlled by systemd. However the functions above work
272
for both user and system services.
273
274
See sd_booted(3) for more information.
275
*/
276
int
sd_booted(
void
);
277
278
#ifdef __cplusplus
279
}
280
#endif
281
282
#endif
Generated on Mon Apr 28 2014 15:37:26 for D-Bus by
1.8.6